The Sunroc R1P Remote Water Chiller shall deliver at least 1.0 gph of water at 50°F cooled from 80°F inlet water at 90°F ambient. Evaporator shall be copper evaporator tube on stainless steel water storage tank and both shall be encapsulated in insulation. Total water system shall be stainless steel. R-134a refrigerant system shall be hermetically sealed and refrigerant flow shall be capillary tube controlled. An adjustable thermostat having an off position shall control refrigeration system. Potable water system components shall comply with Safe Drinking Water Act Amendments, the 1988 Lead Contamination Control Act and shall be Certified to ANSI 61 Section 9. Chilled water capacity shall be rated per ARI Standard 1010. Cooler shall be Listed by Underwriters Laboratories Inc. to U.S. and Canadian safety standards. Drinking water chiller shall be Oasis model R1P.
No Lead Design:
These Water Coolers are certified to be lead-free as defined by the Safe Drinking Water Act and are manufactured with a waterway system utilizing completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted.
- Powder coated galvanized steel cabinet with plastic front.
- Air-cooled; designed to fit under a sink.
- Compact, economical and easily installed
- Four foot (4') insulated power cord with NEMA 5-15 plug
- Stainless steel storage tank
- 1/4 OD stainless steel water tube connections
- Welded water lines to eliminate corrosion and assure leakproof operation
- HFC Refrigerant R-134a
|Model # ||R1P|
|ADA Compliant ||No|
|Barrier Free ||No|
|Cooling Capacity ||1 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Water Chiler|
|Outdoor Rated ||No|
|Vandal Resistant ||No|