The Oasis PV8ACSL Water Cooler shall deliver 8.0 gph of 50°F water at 90°F ambient and 80°F inlet water. Model PV8ACSL shall include a single vandal resistant push button to Mechanically activate the flow of water electricity is not required. Basin shall be designed to eliminate splashing and standing water. Bubbler shall be vandal resistant, have a flexible guard and operate between 20 and 120 psi. Cabinet finish shall be brushed stainless steel. Cabinet shall have perforated galvanized steel screens covering all openings to prevent objects from being inserted into the cooler. Cooling system shall use R-134a refrigerant. Shall comply with ANSI A117.1 and ADA. Shall be listed by Underwriters' Laboratories to U.S. and Canadian standards. Shall comply with ANSI/NSF 61.
These Water Coolers comply with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children's environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
These Water Coolers are certified to be lead-free as defined by the Safe Drinking Water Act. Oasis Water Coolers are manufactured with a waterway system utilizing completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted.
Universal Split Level:
Permits the right side to be mounted higher than the left or the left side to be mounted higher than the right. Includes a universal drain pipe and side access panel.
- Built-in 100 micron strainer stops particles before they enter the waterway.
- Waterways Are Lead-Free In Materials & Construction.
- Stainless Steel Top.
- High Efficiency Cooling Tank and Coil.
- Refrigerant R-134a.
- Heavy Duty Galvanized Steel Frame.
- External Stream Height Adjustment
- Vandal resistant bubbler with flexible guard.
- Vandal resistant front push button.
- Vandal resistant fasteners.
- Galvanized Steel screens welded to inside of side vents and bottom vent hole.
- Standard Cabinet Finishes:
Brushed Stainless Steel.
- Note: Adding any of the above accessories may delay shipment
|Model # ||PV8ACSL|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||8 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||Yes|