The Oasis PF8ACEE Water Cooler shall deliver 8.0 gph of 50°F water at 90°F ambient and 80°F inlet water. Shall have VersaFilter® system for taste, odor and chlorine reduction, lead reduction and cyst reduction. VersaFilter system shall comply with NSF standards 42 and 53. Model PF8ACEE shall include a light beam that is reflected off the use to automatically start water flowing. Not even a touch is needed. If user does not move away within 30 seconds, water shuts off automatically. Model also meets guidelines for children’s accessibility providing the floor to orifice height is 30 inches and proper clear floor space is provided for frontal approach. Basin shall be designed to eliminate splashing and standing water. Bubbler shall have a flexible guard and operate between 20 and 120 psi. Cabinet finish shall be Sandstone powder coated paint or brushed stainless steel. Cooling system shall use R-134a refrigerant. Shall comply with ANSI A117.1 and ADA. Shall be listed by Underwriters' Laboratories to U.S. and Canadian standards.
These Water Coolers comply with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children’s environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
These Water Coolers are certified to be lead-free as defined by the Safe Drinking Water Act. Oasis Water Coolers are manufactured with a waterway system utilizing completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted.
- VersaFilter® system for taste, odor and chlorine reduction, lead reduction, and cyst reduction.
- Built-in 100 micron strainer stops particles before they enter the waterway.
- Waterways Are Lead-Free In Materials & Construction.
- Stainless Steel Top.
- High Efficiency Cooling Tank and Coil.
- Refrigerant R-134a.
- Heavy Duty Galvanized Steel Frame.
- Infrared Sensor Activation
- Flexible Bubbler Guard.
- Standard Cabinet Finishes:
Sandstone powder coated paint on galvanized steel.
- Optional finishes at additional cost:
Stainless Steel, Regency Bronze.
- Glass Filler (Factory Installed)
- Note: Adding any of the above accessories may delay shipment
|Model # ||PF8ACEE|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||8 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||No|