The Oasis P10CP Water Cooler shall deliver at least 10 GPH of water at 50°F (10C) cooled from 80°F (26.7C) inlet water at 90°F (32.2C) ambient. Bubbler shall have flexible guard, have a non-squirt feature and a lever handle shall activate water flow. Bubbler shall provide smooth steady water flow by means of integral regulator that operates from 20 to 120 psig supply pressure. Evaporator shall be high efficiency tank type and shall be encapsulated in insulation. R-134a refrigeration system shall be hermetically sealed and refrigerant flow shall be capillary tube controlled. An adjustable thermostat having an off position shall control refrigeration system. Stainless steel top shall have an integral drain strainer. Exterior panels shall be powder coated galvanized steel (standard finish) or stainless steel (optional finish). Potable water system components shall comply with the Safe Drinking Water Act Amendments, the 1988 Lead Contamination Control Act and shall be Certified to NSF/ANSI 61, Section 9. Chilled water capacity shall be rated per ARI Standard 1010. Cooler shall be Listed by Underwriters Laboratories Inc. to U.S. and Canadian safety standards.
No Lead Design:
These Water Coolers are certified to be lead-free as defined by the Safe Drinking Water Act. Oasis Water Coolers are manufactured with a waterway system utilizing completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted.
- Built-in 100 micron strainer stops particles before they enter the waterway.
- Waterways Are Lead-Free In Materials & Construction.
- Bubbler with activation lever
- Heavy-gauge steel cabinet with seperate galvanized steel base
- High Efficiency Cooling Tank and Coil
- Refrigerant R-134a
- Stainless steel top
- Limited 5-year warranty
- Product Certified by NSF to NSF/ANSI Standard 61.
- Standard Cabinet Finishes:
Sandstone Powder Coated Paint on Galvanized Steel.
- Optional finishes at additional cost:
Push Handle 029603-004
- Note: Adding any of the above accessories may delay shipment
|Model # ||P10CP|
|ADA Compliant ||No|
|Barrier Free ||No|
|Cooling Capacity ||10 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Floor Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||No|