The Oasis M8CREM Water Cooler shall deliver 8.0 gph of 50°F degree water at 90°F ambient and 80°F inlet water. Model M8CREM shall include infrared sensors to activate the flow of water. Fountains shall be designed to eliminate splashing and standing water. Bubbler shall have a flexible guard and operate between 20 and 120 psi. As a standard feature, the bubblers contain an antimicrobial silver additive (AlphaSan®) that inhibits the growth of bacteria, fungus, mold and mildew. Chiller unit shall use R-134a refrigerant. Shall be listed by Underwriters' Laboratories certified by Canadian Standards Association. Shall comply with ANSI A117.1 and ADA. Shall comply with the Safe Drinking Water Act and Lead Contamination Control Act. Shall comply with ANSI/NSF 61.
M8CREM has a reflective light beam that activates the fountain when the user approaches on the lower unit only. No touching or pushing is needed. The system features a time delay to avoid unwanted activation and a shut off if the user does not move away in 30 seconds.
These Water Coolers comply with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children's environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
These Water Coolers are certified to be lead-free as defined by the Safe Drinking Water Act. Oasis Water Coolers are manufactured with a waterway system utilizing completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted.
- AlphaSan® antimicrobial additive in bubblers, push pads and noses.
- Infrared Sensor Activation
- Built-in 100 micron strainer stops particles before they enter the waterway.
- Waterways Are Lead-Free In Materials & Construction.
- High Efficiency Cooling System.
- Refrigerant R-134a.
- Brushed Stainless Steel Finish
- Flexible Bubbler Guard
- Heavy-Duty Galvanized Steel Wall Mounting Frame.
- Limited 5-Year Warranty
- Standard Cabinet Finishes:
- Optional finishes at additional cost:
- Note: Adding any of the above accessories may delay shipment
|Model # ||M8CREM|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||8 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||No|