The Oasis F703PM Drinking Fountain is a three station, white powder coat paint cast aluminum wall mounted unit. One-piece stainless steel bubblers shall be activated by front mounted push buttons. Water regulation adjustments shall be accessible from the front of the fountain. Cast aluminum three station drinking fountain for direct connection to a cold water supply or to a remote water chiller. Fountains shall be furnished with a bottom cover plate,1 1/2 low inlet brass trap and built-in strainer. Fountains shall comply with ANSI 117.1 and ADA.
These Water Coolers comply with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children's environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
These Water Coolers are certified to be lead-free as defined by the Safe Drinking Water Act. Oasis Water Coolers are manufactured with a waterway system utilizing completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted.
- Built-in 100 micron strainer stops particles before they enter the waterway.
- Waterways Are Lead-Free In Materials & Construction.
- Button for each station activates the water flow for the respective fountain
- White powder coat finish
- Flexible bubbler guard
- Bottom Cover Plate
- Exclusive one-piece seamless vinyl clad stainless steel bubbler
- Low inlet brass trap
- Limited 1-year Warranty
- Standard Cabinet Finishes:
White Powder Coat Paint.
|Model # ||F703PM|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||NA|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||No|