The Haws H1011.8HO Water Cooler is an electric "Hi-Lo" wall mounted barrier-free unit. Shall include dual 18 gauge Type 304 Stainless Steel satin finish basins with integral swirl design, 14 gauge Type 304 Stainless Steel wall bracket, push-button operated valves with front-accessible cartridge and flow adjustment with one basin and a "hands-off" electric sensor activated valve on the other, polished chrome-plated brass vandal-resistant bubbler heads with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plates, stainless steel satin finish back panel and louvered intrusion-proof grill, high and low fountain mounting levels, and 1-1/4" O.D. waste pipes. The R-134a refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 lph) of water at 50°F (10°C) cooled from 80°F (26.7°C) inlet water at 90°F (32.2°C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5
Specifically, this type fountain may be placed in settings such as: schools, office buildings, shopping malls, and other indoor environments where there is a demand for a chilled water source and/or wheel chair access.
- Push Button:
With its patented (Pat.# 6,981,692) push-button valve assembly which allows for front access stream adjustment as well as cartridge and strainer access, this fountain offers the ultimate in ease of maintenance.
- Hands-Free Operation:
Electric sensor allows for operation simply by moving in front of fountain, eliminating the need for manual activation under a number of circumstances.
- Back Panel:
Stainless steel back panel helps to protect the wall from inadvertent splashing, and its decorative satin finish increases location visibility and completes the fountains attractive appearance.
Barrier-free capabilities combined with its ease of use allows for a number of installation location possibilities.
- Quality Control:
Fountain is pre-built and fully water and pressure tested to ensure no leaks and proper function for reduced installation time and added peace of mind.
18 gauge Type 304 Stainless Steel fountain with attractive and functional swirl bowl design, along with a vandal-resistant bottom plate provides a long lasting unit with added peace of mind.
- Bubbler Head:
Polished chrome-plated brass bubbler head with integral laminar flow prevents splashing and provides a superior flow pattern. The integral basin shank and inserted roll pin adds vandal resistance strength to the design, and the shielded angled stream orifice produces a steady sanitary source of water.
Beautiful #4 satin stainless steel finish basin can be easily cleaned and maintained while also resisting corrosion.
Heavy-duty galvanized steel mounting frame provides the sturdy hidden support needed for the "Hi-Lo" configuration of this unit. Further convenience is given to the chiller with the integral fold-out shelf.
Haws Part# HCR8 - 8 gallons per hour chiller; and Haws Part# MTGFR.LG - In-wall mounting frame.
Model 6426, 12" x 2", in-line lead removal element that reduces lead from incoming water supply.
- Cane Touch Skirt:
Model SK3, satin finish stainless steel cane touch skirt for installation on high unit to comply with ADA protruding objects guidelines.
- Note: Adding any of the above accessories may delay shipment
|Model # ||H1011.8HO|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||8 GPH|
|Fountain Type ||Electric Water Cooler|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||Yes|