Halsey Taylor WM8A-WF-Q 8 GPH Wall Mounted Water Cooler with Filter (Refrigerated Drinking Fountain)
Standard Platinum Vinyl Cabinets

Halsey Taylor WM8A-WF-Q 8 GPH Wall Mounted Water Cooler with Filter (Refrigerated Drinking Fountain)

Write a Review
Your Price: $1,055.70
List Price:$1,609.00
Your Savings:$553.30(34%)
Part Number: WM8A-WF-Q

Accessories


The Halsey Taylor WM8A-WF-Q Water Cooler is an electric refrigerated wall-mounted unit. Delivers 8.0 GPH of 50°F water at 90°F ambient and 80°F inlet water. Fountain has stainless steel basin with removable drain strainer. Bubbler is two stream, moundbuilding type. Separate valve and automatic stream regulator can be mounted within cabinet. Refrigeration system employs high efficiency, positive start compressor using R134A non-pressurized tank with totally encapsulated insulation and be controlled by positive sensing thermostat. Unit is certified to NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act. Unit complies with ARI Standard 1010.

No Lead Design:
These Water Coolers are certified to be lead-free as defined by the Safe Drinking Water Act. Halsey Taylor Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.

Water Sentry® Filter System:
Equipped with the Water Sentry HWF172 lead reduction system which is designed to remove cysts, such as cryptrosporidium and giardia, lead particles and chlorine taste and odor. The filter has been tested to the following NSF International standards: NSF/ANSI Standards 42 Chlorine, and Taste and Odor. NSF/ANSI Standard 53 for Reduction of Lead and Cyst. Features include Quick-Disconnect, 1/4 turn installation. Automatic inlet shut-off valve that closes when filter is removed. High-grade filter is made with activated carbon and patented ATS lead-removal media. Cap and housing shall be made of rust and corrosion free plastic. Filter should be replaced every 1,500 gallons (5678 liters) or approximately one (1) year after installation. Use part # 55987C when ordering replacement filter.

Product Features:
  • Cooler Top:
    Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain. Anti-splash design reduces splatter. Contoured to insure proper drainage.
  • Bubbler:
    Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water.
  • Pushbutton Actuation Mechanism:
    Self closing, vandal-resistant pushbutton does not require grasping or twisting.
  • Automatic Stream Height Regulator:
    Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi.
  • Inlet Strainer:
    Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway.
  • Temperature Control:
    Positive sensing thermostat for controlling temperature of storage tank water. Factory set at 50°F Adjustable +/- 5°F.
  • Refrigeration System:
    Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser. System uses R134A refrigerant. Protected by Halsey Taylor's Limited 5 Year Warranty.
  • Storage Tank:
    Non-pressurized stainless steel evaporator/storage tank for long life. Waterways are certified to NSF/ANSI 61, far exceeding the requirements of the Safe Drinking Water Act.
  • Ventilation:
    Insure proper ventilation by maintaining 6" (152mm) minimum clearance from cabinet louvers to wall.
Optional Accessories
  • Note: Adding any of the above accessories may delay shipment
  • Note: As per the manufacturer's policy, adding Glass Filler option makes unit non-returnable.
Product Details
Manufacturer Halsey Taylor
Model # WM8A-WF-Q
ADA Compliant No
Barrier Free No
Cooling Capacity 8 GPH
Freeze Resistant No
GreenSpec Listed No
Installation Type Wall Mounted
Outdoor Rated No
Refrigerated Yes
Vandal Resistant No

Related Items

TOP