The Halsey Taylor HTHB-HRFER is an in-wall, recessed bottle filling station paired with the single Contour™ refrigerated fountain featuring the high-efficiency SJ8 water chiller.
HYDROBOOST® Bottle Filler:
The unit has a recessed design with a solid lower panel, a quick fill rate of 1.1 gallons per minute, includes laminar flow to provide a clean fill with minimal splash and easy maintenance. The bottle filler is equipped with an automatic 20-second shut-off timer, a user interface design makes touch-less operation intuitive and key plastic components are integrated with silver ion anti-microbial protection to inhibit growth of mold and mildew. The unit is designed with hinged top and bottom stainless steel panels for easy access and service.
Visually displays count of plastic bottles saved from waste. (Based on 16 oz. bottles)
Features contoured basin and softly rounded corners and edges.
Halsey Taylor Double Bubbler™:
Exclusive one-piece, chrome-plated two-stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water.
Automatic Stream Height Regulator:
Self-closing assembly is located inside the unit to prevent tampering. A constant stream height is automatically maintained under line pressure that varies from 20 to 105 psi.
Push-Button Actuation Mechanism:
Self-closing, vandal resistant push-button does not require grasping or twisting.
Manufactured from corrosion resistant, galvanized steel. Open construction design for ease of installation. Mounting frames can be shipped in advance for rough-in installation.
The Halsey Taylor HTHB-HRFER complies with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children’s environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
The Halsey Taylor HTHB-HRFER is certified to be lead-free as defined by the Safe Drinking Water Act. Halsey Taylor Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.
Supply water - 105 PSI maximum. Minimum 40 PSI supply line pressure required in special circumstances when both sides of bi-level are in use simultaneously to ensure adequate stream height. Does not apply to non-refrigerated units.
Hydroboost station equipped with electric cord and three-prong molded rubber plug for use with 15-amp minimum receptacle. For cooling unit, a junction box for a (3) wire, 10 amp branch circuit is provided. Rated at 115 volt, 60 Hz, single phase.
Each HTHB-HRFER is shipped in 5 cartons including: HYDROBOOST Station with Solid Lower Panel, HRF-ER Fountain, Mounting Frames (2), Cooling Unit - SJ8
|Manufacturer ||Halsey Taylor|
|Model # ||HTHB-HRFER|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||8 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||Yes|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||No|