The ELKAY EZSTLG8LC Water Cooler is a bi-level high-efficiency electric, refrigerated water cooler. The unit will deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F inlet water. It meets ADA guidelines and has a lead-free design which is certified to NSF/ANSI 61 and 372. The unit also meets Federal and State low-lead requirements, is certified to UL399 and CAN/CSA 22.2 No. 120 and is GreenSpec® Listed.
The Elkay EZSTLG8LC complies with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children’s environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
The Elkay EZSTLG8LC is certified to be lead-free as defined by the Safe Drinking Water Act. Elkay Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.
Elkay EZSTLG8LC Cooling System:
- Energy Saving:
Energy efficiency performance exceeds average market performance by 35%
- Motor Compressor:
Hermetically sealed, reciprocating type, 115V, 60 Hz single phase. Sealed-in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug (domestic models).
Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
- Cooling Unit:
Combination tube-tank type. Self cleansing. Tube portion is continuous coil of copper tubing. Tank is stainless steel. Fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self-extinguishing material.
- Refrigerant Control:
Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free operation.
- Temperature Control:
Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements. Easily accessible.
Elkay EZSTLG8LC Construction:
One piece polished to a uniform Elkay bright luster finish. Basin has integral drain grid, embossed bubbler pad. No exposed fasteners.
- Stainless Steel Basin:
Galvanized structural steel chassis supports refrigeration system and fastens to wall. Provides increased structural integrity and rigidity to cooler.
- Exclusive Flexi-Guard® Safety Bubbler:
Innovative design utilizes an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in location to prevent rotation.
- Upper Shroud:
Contoured shock-absorbing, provides additional protection against accidental injury. No exposed fasteners.
- Lower Shroud:
One piece easy to remove and replace. Allows access to internal components from three sides.
Cabinet design allows for flush to wall mounting. No recess space is required.
- Color Selection:
Unless otherwise specified cabinet is two-tone gray on upper shroud with textured gray lower shroud. Stainless Steel lower shroud available at extra cost.
Elkay EZSTLG8LC Category: