The Elkay ERFPM28K Water Cooler is a two-level, barrier-free stainless steel unit that has recessed in-the-wall refrigeration system and stainless steel grill. All stainless steel polished to a satin finish. The Elkay ERFPM28K has contoured basin to minimize splashing, the Flexi-Guard® safety bubbler, easy to operate, fully functional, vandal-resistant front push button and a patented* valve and in-line flow regulators provide constant stream from 20 to 105 psi. The Elkay ERFPM28K has an energy efficient refrigeration system that utilizes a combination tank continuous-tube type evaporator, refrigerant drier, and capillary tube. Vandal resistant bottom cover plates included. Note: Minimum 40 psi supply line pressure required in special circumstances where both sides of bi-level are in use simultaneously to ensure adequate stream height. Use of water filter in this situation is not recommended.
The Elkay ERFPM28K complies with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children's environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
The Elkay ERFPM28K is certified to be lead-free as defined by the Safe Drinking Water Act. Elkay Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.
Elkay ERFPM28K Cooling System:
- Motor Compressor:
Hermetically sealed, reciprocating type, 115V, 60 Hz single phase. Sealed-in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug.
Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
- Cooling Unit:
Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self extinguishing plastic material.
- Refrigerant Control:
Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free performance.
- Temperature Control:
Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.
Elkay ERFPM28K Construction:
- Fountain Body:
#18 gauge, type 304 nickel bearing stainless steel polished to a lustrous satin finish with high shined outer edge. Contoured basin offers large strike area to minimize splashing. Fully functional front push button is easy to operate.
- Exclusive Flexi-Guard® Safety Bubbler:
Innovative design utilizes an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in location to prevent rotation.
- Front Panel Grill:
Made of type 304 stainless steel, polished to a uniform Elkay satin finish. Removable louvered ventilating grill encloses refrigeration unit and plumbing.
- Wall Mounting Frame:
MF100 frame furnished with each unit. Frame allows flush mounting to finished wall.
LK464 drain and trap assembly included.
- Vandal-resistant StreamSaver™ Bubbler
- Note: Adding any of the above accessories may delay shipment
- Note: As per the manufacturer's policy, adding Glass Filler option makes unit non-returnable.
Elkay ERFPM28K Category:
|Model # ||ERFPM28K|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||8 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||No|