The Elkay ER191 Remote Water Chiller is a remote type, electric refrigerated unit with a Chilling capacity of 19 gallons per hour of 50°F drinking water, based upon 80°F inlet water and 90°F ambient. The Elkay ER191 is a compact, highly efficient water chiller designed for use with any drinking fountain and connects to a bubbler, glass filler or cold water dispenser. The Elkay ER191 converts a drinking fountain into a water cooler and installs directly under fountain or other application, or may be located in a service area to serve up to two remote outlets (within 15 feet of chiller recommended). Also recommended for photo-processing, medical or experimental laboratories and a pre-cooler for beverage dispensing.
No Lead Design:
The Elkay ER191 is certified to be lead-free as defined by the Safe Drinking Water Act. Elkay Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. The Elkay ER191 waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.
Elkay ER191 Cooling System:
- Motor Compressor:
Hermetically sealed, reciprocating type, 1/2 HP, 115VAC, 60 Hz single phase. Sealed-in lifetime oil supply.
Rated 9.2 Amps, 735 Watts.
Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
- Cooling Unit:
Combination tube-tank type. Evaporator cooling coil of continuous copper tubing. Tank is stainless steel with a volume of 0.7 gallons. All water contacts stainless steal surfaces. Fully insulated.
- Refrigerant Control:
Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free performance.
- Temperature Control:
Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.
Elkay ER191 Construction:
Rust-resistant, galvanized steel.
- Drain Plug:
This chiller is provided with a plastic drain plug which incorporates an o-ring seal. This fitting is designed for potable water applications and should be replaced with a suitable fitting if chiller is used with more aggressive liquids.
Elkay ER191 Category:
|Model # ||ER191|
|ADA Compliant ||No|
|Barrier Free ||No|
|Cooling Capacity ||19 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Remote Water Chiller|
|Outdoor Rated ||No|
|Vandal Resistant ||No|