The Elkay EHFRAM7K Water Cooler is a fully recessed barrier-free stainless steel unit that has recessed in-the-wall refrigeration system and stainless steel grill. All stainless steel polished to a lustrous satin finish. The Elkay EHFRAM7K has contoured basin to minimize splashing, the Flexi-Guard® safety bubbler, easy to operate, fully functional stainless steel, vandal-resistant front push bar with raised letters to aid the visually impaired and a patented* valve and in-line flow regulators provide constant stream from 20 to 105 psi. The Elkay EHFRAM7K has an energy efficient refrigeration system that utilizes a combination tank continuous-tube type evaporator, refrigerant drier, capillary tube, and all copper construction and includes vandal-resistant bottom cover plate.
The Elkay EHFRAM7K complies with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children's environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
The Elkay EHFRAM7K is certified to be lead-free as defined by the Safe Drinking Water Act. Elkay Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.
Elkay EHFRAM7K Cooling System:
- Motor Compressor:
Hermetically sealed, reciprocating type, 115V, 60 Hz single phase. Sealed-in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug.
Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
- Cooling Unit:
Combination tube-tank type. Self cleansing. Tube portion is continuous coil of copper tubing. Tank is stainless steel. Fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self-extinguishing material.
- Refrigerant Control:
Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free performance.
- Temperature Control:
Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.
Elkay EHFRAM7K Construction:
- Fountain Body:
#16 gauge, type 304 nickel bearing stainless steel polished to a lustrous satin finish with high shined outer edge. Contoured basin offers large strike area to minimize splashing. Support arms incorporate unique recess to accept basins. Fully functional stainless steel push bars are easy to operate and have raised letters to aid visually impaired. Bottom cover plate is vandal-resistant.
- Exclusive Flexi-Guard® Safety Bubbler:
Innovative design utilizes an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in location to prevent rotation.
- Front Panel Grill:
Made of type 304 stainless steel, polished to a uniform Elkay satin finish. Removable louvered ventilating grill encloses refrigeration unit and plumbing.
- Wall Mounting Box:
MB30 furnished with each unit. Box allows flush mounting to finished wall, plumbing and electrical service holes are pre-punched on both right and left side to facilitate installation.
Elkay EHFRAM7K Category:
|Model # ||EHFRAM7K|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||7 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||No|