The Elkay EFRPCM8K Water Cooler is a wall type, fully recessed, electric unit and cuspidor combination which includes mounting boxes, refrigeration package, louvered grill and fountain only push bar for bubbler stream and cuspidor rinse control. The Elkay EFRPCM8K has contoured basins to minimize splashing, a Flexi-Guard® safety bubbler, easy to operate, fully functional stainless steel, vandal-resistant front push bar, and a patented* valve and in-line flow regulators provide constant stream from 20 to 105 psi water supply inlet pressure.
The Elkay EFRPCM8K complies with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children's environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
The Elkay EFRPCM8K is certified to be lead-free as defined by the Safe Drinking Water Act. Elkay Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. The Elkay EFRPCM8K waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.
Elkay EFRPCM8K Cooling System:
- Motor Compressor:
Hermetically sealed, reciprocating type, 115V, 60 Hz single phase. Sealed-in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug.
Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
- Cooling Unit:
Combination tube-tank type. Self cleansing. Tube portion is continuous coil of copper tubing. Tank is stainless steel. Fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self-extinguishing material.
- Refrigerant Control:
Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free performance.
- Temperature Control:
Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.
Elkay EFRPCM8K Construction:
- Fountain Body:
One piece #18 gauge stainless steel, type 304. Anti-splash design has Exclusive Cascade basin, tested most splash-resistant, extends 1/2" from finished wall after installation. Fully functional, stainless steel push bar is easy to operate and controls flow to both bubbler and cuspidor.
- Cuspidor Body:
18 gauge, type 304 stainless steel designed to fit against side of fully recessed water cooler. Access doors are flush with front surface of frame which contains recessed area containing self closing push back cup filler, louvered cover drain and LK144 lock and key.
- Exclusive Flexi-Guard® Safety Bubbler:
Innovative design utilizes an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in location to prevent rotation.
- Front Panel Grill:
Made of type 304 stainless steel, polished to a uniform Elkay satin finish. Removable louvered ventilating grill encloses refrigeration unit and plumbing.
- Wall Mounting Box:
MB23A mounting box furnished with each unit. Box allows flush mounting to finished wall, plumbing and electrical service holes are pre-punched on both right and left side to facilitate installation.
Elkay EFRPCM8K Category:
|Model # ||EFRPCM8K|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||8 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||No|