The Elkay ECRSPM8K Water Cooler is a single station barrier-free stainless steel water cooler that has recessed in-the-wall refrigeration system and stainless steel grill. All stainless steel polished to a satin finish. The Elkay ECRSPM8K has contoured basin to minimize splashing, a Flexi-Guard® safety bubbler, an easy to operate, vandal-resistant front push button, and a patented* valve and in-line flow regulators provides constant stream from 20 to 105 psi. The Elkay ECRSPM8K has an energy efficient refrigeration system that utilizes a combination tank continuous-tube type evaporator, refrigerant drier, and capillary tube. A vandal-resistant bottom cover plate is included
The Elkay ECRSPM8K complies with the requirements of A.D.A. (Americans with Disabilities Act) when properly installed. Also meets the guidelines for children's environments providing the floor to orifice height is 30" or less and proper clear floor space is provided for parallel approach. (Based on Architectural and Transportation Barriers Compliance Board final ruling.) Check Local and State Codes.
No Lead Design:
The Elkay ECRSPM8K is certified to be lead-free as defined by the Safe Drinking Water Act. Elkay Water Coolers are manufactured with a waterway system utilizing copper components and completely lead-free materials. These waterways have no lead because all lead materials, such as leaded brass, have been removed. All joints are brazed using silver solder only. No lead solder is permitted. A strainer with an easily cleanable screen is provided to allow trapping and convenient removal of waterborne particulate of 140 microns and larger prior to their entry into the water cooler.
Elkay ECRSPM8K Cooling System:
- Motor Compressor:
Hermetically sealed, reciprocating type, 115V, 60 Hz single phase. Sealed-in lifetime oil supply.
Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
- Cooling Unit:
Combination tube-tank type. Self cleansing. Tube portion is continuous coil of copper tubing. Tank is stainless steel. Fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self-extinguishing material.
- Refrigerant Control:
Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free performance.
- Temperature Control:
Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.
Elkay ECRSPM8K Construction:
- Fountain Body
#18 gauge, type 304 nickel bearing stainless steel polished to a lustrous satin finish with high shined outer edge. Contoured basin offers large strike area to minimize splashing. Fully functional front push button is easy to operate.
- Exclusive Flexi-Guard® Safety Bubbler:
Innovative design utilizes an infused anti-microbial pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in location to prevent rotation.
- Front Panel Grille:
Made of type 304 stainless steel, polished to a uniform Elkay satin finish. Removable louvered ventilating grill encloses refrigeration unit and plumbing.
- Wall Mounting Frame:
MFC100 frame furnished with each unit. Frame allows flush mounting to finished wall.
- Vandal-resistant StreamSaver™ Bubbler
- Note: Adding any of the above accessories may delay shipment
Elkay ECRSPM8K Category:
|Model # ||ECRSPM8K|
|ADA Compliant ||Yes|
|Barrier Free ||Yes|
|Cooling Capacity ||8 GPH|
|Freeze Resistant ||No|
|GreenSpec Listed ||No|
|Installation Type ||Wall Mounted|
|Outdoor Rated ||No|
|Vandal Resistant ||No|