| **NOTE: This model has been discontinued as of 1/01/08**
Pressure drinking water cooler shall deliver at least 15.5 gph (58.7 LPH) of water cooled from 80˚F (26.7˚C) inlet water at 90˚F (32.2˚C) ambient. Bubbler shall have flexible guard, have a non-squirt feature and a lever handle shall activate water flow. Bubbler shall provide smooth steady water flow by means of integral regulator that operates from 20 to 120 psig supply pressure. Evaporator shall be high efficiency tank type and shall be encapsulated in insulation. R-134a refrigeration system shall be hermetically sealed and refrigerant flow shall be capillary tube controlled. Cooler shall have water-cooled condenser. An adjustable thermostat having an off posisition shall control refrigeration system. All controls and wiring shall be sealed in an Underwriters Laboratories, Inc. Listed enclosure to prevent ignition of explosive atmospheres. Stainless steel top shall have an integral drain strainer. Exterior panels shall be powder coated galvanized steel (standard finish) or stainless steel (optional finish). Potable water system components shall comply with the Safe Drinking Water Act Amendments, the 1988 Lead Contamination Control Act. Chilled water capacity shall be rated per ARI Standard 1010. Cooler shall be Listed by Underwriters Laboratories Inc. to U.S. and Canadian safety standards. Drinking water cooler shall be Sunroc model NSFD16WHD. |
