Download Spec Sheet
|
Download Parts Breakdown
The Halsey Taylor HTV-8-Q-TTG is a
self-contained, electric refrigerated wall-mounted water cooler with softly rounded corners and
edges, designed to be easily accessible to physically challenged individuals.
Cabinet
Molded two-tone gray space-age polymer with softly rounded edges.
Resistant to impact, wear, corrosion, heat and sunlight.
Cooler Top
Non-corrosive stainless steel cooler top, number 300 series with satin
finish resists stains and corrosion and is easy to maintain. Anti-splash design reduces splatter. Contour
design and integral strainer insure proper drainage.
Bubbler
Exclusive one-piece, chrome-plated two-stream mound-building bubbler with
non-removable anti-squirt feature and integral hood insures a satisfying drink of water.
Pushbutton Actuation Mechanism
Self-closing light-touch push bars require minimal pressure to
activate.
Automatic Stream Height Regulator
Self-closing assembly is located inside unit to prevent tampering. Unit
resists corrosion and liming. A constant stream height is automatically maintained under line pressures that
vary from 20 to 105 psi.
Solenoid Valve / Inlet Strainer
Self-closing solenoid valve includes easily cleaned in-line strainer that
screens particles of 140 microns or larger before they enter the waterway.
Temperature Control
Positive sensing thermostat for controlling temperature of storage tank water. Factory set at 50° F Adjustable ± 5° F.
Storage Tank
Non-pressurized stainless steel evaporator/storage tank for long life.
Waterways are certified to NSF/ANSI 61, far exceeding the requirements of the Safe Drinking Water Act.
Refrigeration System
Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser. System uses R134A refrigerant. Protected by Halsey
Taylor’s Limited 5 Year Warranty.
Ventilation
Insure proper ventilation by maintaining 6" (152mm) minimum clearance from
cabinet louvers to wall.
Suggested
Specification
Shall deliver 8 GPH of 50° F water at 90° F ambient and 80° F inlet water. Shall have stainless steel basin with integral drain strainer. Bubbler shall be two-stream, mound building type. Separate valve and automatic stream regulator shall be mounted within cabinet. Refrigeration system shall employ high efficiency, positive start compressor using R134A, non-pressurized tank with totally encapsulated insulation and be controlled by positive sensing thermostat. Shall have push-bar water controls. Cooler shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The
manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Unit complies with ARI Standard 1010.
Product
Details
| Manufacturer |
Halsey Taylor |
| Model # |
HTV-8-Q-TTG |
| ADA Compliant |
Yes |
| Barrier Free |
Yes |
| Cooling Capacity |
8 GPH |
| Freeze Resistant |
No |
| GreenSpec Listed |
No |
| Installation Type |
Wall Mounted |
| Outdoor Rated |
No |
| Refrigerated |
Yes |
| Vandal Resistant |
No | |
