| Note: Adding any of the above accessories
may delay the shipment of your drinking fountain.
As per the manufacturer's policy, if a glass filler is added to this drinking fountain it is non-returnable.
Download Spec Sheet | Download Parts Breakdown The Halsey Taylor HAC8FS-Q ADA is a self-contained, electric refrigerated wall-mounted water cooler easily accessible to physically challenged individuals. Cabinet Platinum vinyl finish panels are standard. Stainless steel panels available at additional cost. Cooler Top Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain. Anti-splash design reduces splatter. Contoured to insure proper drainage. Bubbler Exclusive one-piece, chrome-plated twostream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. Push Bar Actuation Mechanism Self-closing light-touch push bars on front and sides with raised letters for the visually impaired. Automatic Stream Height Regulator Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. Inlet Strainer Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway. Temperature Control Positive sensing thermostat for controlling temperature of storage tank water. Factory set at 50° F Adjustable ± 5° F. Storage Tank Non-pressurized stainless steel evaporator/storage tank for long life. Waterways are certified to NSF/ANSI 61, far exceeding the requirements of the Safe Drinking Water Act. Refrigeration System Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer, and self-lubricated fan cools copper/aluminum condenser. System uses R134A refrigerant. Protected by Halsey Taylor’s Limited 5 Year Warranty. Ventilation Insure proper ventilation by maintaining 6" (152mm) minimum clearance from cabinet louvers to wall. Suggested Specification Shall deliver 8.0 GPH of 50° F water at 90° F ambient and 80° F inlet water. Shall have stainless steel basin with removable drain strainer. Bubbler shall be two-stream, mound building type. Separate valve and automatic stream regulator shall be mounted within cabinet. Refrigeration system shall employ high efficiency, positive start compressor using R134A, non-pressurized tank with totally encapsulated insulation and be controlled by positive sensing thermostat. Shall have front and side push-bar water controls with raised lettering for the visually impaired. Cooler shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Unit complies with ARI Standard 1010. Product Details | Manufacturer | Halsey Taylor | | Model # | HAC8FS-Q ADA | | ADA Compliant | Yes | | Barrier Free | Yes | | Cooling Capacity | 8 GPH | | Freeze Resistant | No | | GreenSpec Listed | No | | Installation Type | Wall Mounted | | Outdoor Rated | No | | Refrigerated | Yes | | Vandal Resistant | No | |
